[Steven's 72]

Hey Guys,

I have been collecting my pieces for my Tranny swap, and I just got my 4 speed conversion kit from (ShiftWorks) and I also have a new horse shoe shifter I will be picking up tomorrow, any tips you may have for the shifter conversion will be greatly appreciated.

Thanks in Advance Steven Rod.

 

[DONTWANT2]

I have sent this link to quite a few. I think it has some very good info.
http://macc.chevelles.net/console_install.pdf
Good luck

 

[Bowtie-72]

As far as the shifter goes, there's a new plate for the detents that gets swapped out. IF you're also changing from column to floor shift, there's a little more involved, but also pretty simple. The floor pan has dimples for where the mounting bolt holes will go, and there's a flat spot on the left side of the floor pan where the hole for the cable will be drilled.

Keep asking if there's any other questions.

 

[Steven's 72]

Thanks Guys

 

[Dean]

Never heard of a 4 speed horse shoe shifter

 

[davewho1]

Never heard of a 4 speed horse shoe shifter

I think he's referring to an overdrive 4-speed automatic.

 

[Bowtie-72]

My horseshoe shifter does 4 speeds.....

 

[TC]

Mine does "6"
T.C.

 

[Philip]

Never heard of a 4 speed horse shoe shifter

Dean the shifter is the same, the detent plate is different to allow a stop in all the gears and the plastic indicator plate are changed so that it shows the overdrive pattern.