Team Chevelle banner

Horn Ring Works Backwards

510 Views 0 Replies 1 Participant Last post by  Brob
1964 Convertible stock steering wheel I think. (I had two steering wheels one was from another model Chevy I think Impala. Both looked the same I used the best one)

Horn works after replacing the spring and copper contact that comes up through the hole in the steering wheel. This hole is located about 10 or 11 o’clock.

To make the horn honk the top of the horn button has to be pushed or the horn ring lifted not pushed down. Something internal would have to be 180º off?

The steering wheel cannot be reversed, because the spokes would angle up and the horn ring would be on top in front of the gauges. :confused:
1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.