Team Chevelle banner
1 - 8 of 8 Posts

· Registered
Joined
·
37 Posts
Discussion Starter · #1 ·
72 chevelle. Low beams work, parking lights work, when hit foot switch for high beams I have no lights except parking. Put in new headlight switch, and high beam foot switch. I tested the wires on the high beam bulbs and seem to have no power. Any ideas??
 

· Premium Member
Joined
·
2,720 Posts
Hate to go here but you didn’t specify…… Did you check the bulbs, are they the correct DUAL filament bulbs with 3 prongs?
 

· Registered
Joined
·
1,877 Posts
I'd jump up and down on the dimmer switch for a while, new or not. They get dirty and stop working.
The connector at the D-switch gets wet and things corrode.
After that, measure the voltage at the bulb connectors.
 

· Premium Member
Joined
·
2,720 Posts
The single headlights on each side utilize the same ground for high and low….. so a ground at the bulb is not your problem.

TAN is LOW positive and LT. Green is HIGH positive. Turn on the highs and start tracing backwards (starting at the headlights) until you find your loss of power.

 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top