[taylor21293]

So my buddy and I are having even MORE wiring issues (M&H should send some wiring guides with their kits haha). I've included pictures of the wires we're stumped on. Wiring is set up for TH400 trans, HEI, and it's being installed on a 1972 Monte Carlo. The first picture is a wire coming off of the front forward lamp harness. The second picture are two wires connected to a plastic connector, where my index finger is touching. It's an orange and tan wire, coming from the engine harness. The third wire is coming from the engine harness, off of the starter wire bunch. Thanks!

 

[heimjoint]

Not sure about the second two but the first wire goes to the brake proportioning valve bolted to the inside of the frame, it activates a light on your dash if there is a brake malfunction.........

 

[Coppertop]

I'll throw my hat in the ring...

1) Brake warning sender wire. Goes to terminal on brake distribution block.
2) th400 kick down power supply connector
3) blower motor wire for heater only cars

 

[aawtech]

I'll throw my hat in the ring...

1) Brake warning sender wire. Goes to terminal on brake distribution block.
2) th400 kick down power supply connector
3) blower motor wire for heater only cars

Ding, Ding, Ding.......

We have a winner! Nice job.


Donny