Changing from points dist. to HEI, Question is the points number 1 wire is one forward of hei dist. when setting hei dist. what should i point the rotor to old 1, or new 1 on hei.example is below
00
1 is on point dist
00
-1 on HEI
The 00 represents the two plugs on front of dist.
[This message has been edited by bseary (edited 07-10-2002).]
[This message has been edited by bseary (edited 07-10-2002).]
00
1 is on point dist
00
-1 on HEI
The 00 represents the two plugs on front of dist.
[This message has been edited by bseary (edited 07-10-2002).]
[This message has been edited by bseary (edited 07-10-2002).]
