Chevelles.com banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
I have replaced my engine, dash harness and bought a new printed circuit for my 72 sprint cluster. After installing everything I can't get the bulbs to light correctly and the gauges temp, fuel register hot on the correct side, but they also show dim on two of the other post. The circuit has power through it. Some of the bulbs light and the others don't. The turnsignal bulbs light when the headlight switch is activated...any help...please
 

·
Registered
Joined
·
7,762 Posts
Sounds like one of the ground wires didn't get tightened down. On my 72 the grounds tie above the e-brake pedal release. Your negative battery should have a small lead to the right inside fender. Check to see if that is there. Try grounding the metal dash frame to the body with a temporary jumper wire. See if that changes anything.
 
1 - 2 of 2 Posts
Top