[Lighting64]

where is a good place to get just a fuse block and firewall connectors? i don't need the whole wireing kit. really just where the connectors come thru the firewall. it is for a 64 ss malibu with auto and a 327. hate to wait till spring to rumage thru the local junk yard.:sad:

 

[vrooom3440]

Cannot guarantee for a '64, but give American Autowire/Factory Fit a call. They have a seperate catalog for the OEM reproduction harnesses and if you read all the way to the bottom of the long list of harnesses for your model, you just may find a fuse block. I went this route on my '68 and it cost me about $75.

As to the firewall bulkhead, do you have a problem with terminals or with the connector body? The terminals are replaceable within the connector body and you can get those from AAW too.

 

[Lighting64]

PROBLEM YES!!! THE GUY WHO HAD THIS CAR BEFORE PAINTED OVER, INSIDE, AND OUTSIDE THE CONNECTORS!!!!! THE PLASTIC IS PRETTY WELL "ATE UP" I WILL TRY TO SAVE THEM THE BEST I CAN, BUT NEW ONES WOULD BE BETTER. I AM RIGHT NOW REWIREING THE ENTIRE FRONT OF THE CAR, I.E. FROM FIREWALL FOREWARD. ALL I CAN THINK IS WTH!!!
WIRES MELTED TOGETHER AND SPLICES EVERYWHERE.:sad:






IT IS A TRUE 64 SS, THAT IS WHAT KEEPS ME GOING:yes: :thumbsup: