Chevelles.com banner

1 - 3 of 3 Posts

·
Premium Member
Joined
·
19,940 Posts
Anything will fit with a bit of work, but I doubt if they'd be a drop in swap. Probably have to create a frame (or spacers in a pinch) to get the correct height and either drill new mounting holes in the frame to match the Chevelle's holes in the floor or drill new holes in the floor to match the seat tracks.

------------------
TC Gold #92/ACES #1709
67 SS & 67 Elky
GR8PMKN

Dale's Place Team 67
Midwest Chevelle Regional Governing Council
Integrity: If you have it, it doesn't matter - If you don't have it, it doesn't matter.
 

·
Registered
Joined
·
17 Posts
Discussion Starter #3
Dale,
Thanks for the response. Since the seats looked similar, I thought I would ask the question. This is what I thought but wasn't real sure.
 
1 - 3 of 3 Posts
Top