Team Chevelle banner
  • Hey everyone! Enter your ride HERE to be a part JULY's Ride of the Month Challenge!
1 - 2 of 2 Posts

567 Posts
Discussion Starter · #1 ·
Hoping someone can point me in the right direction here.

My 69' had rear drum brakes with disc up front with a booster. I removed the booster, cut the pushrod (from brake pedal to MC), and put in a new MC with a different size bore to accommodate the lack of a booster. I left the drums on the rear.

With the booster off the firewall, the location of the MC has shifted and the brake lines to the proportioning valve are off. Verse bending new lines, I'm curious if anyone is aware of a kit that includes the brake lines I need from the MC to proportioning valve w/out a brake booster? Stainless would be even better. I've looked around, but not sure if what I'm finding will work.

1 - 2 of 2 Posts