[bryan6987]

heya

anyone know of a good brake line kit to buy that will include the hard line

from the distribution block to the rubber line mount on the front left side?

how do you know if you have power or manual drum brakes?

ive seen 3pc line kits, do they include this part?:beers:

 

[bryan6987]

opgi has some brake lines i liked, i think i will buy some from them

sooooo if i have a power booste ri have power drums neato ok i figured

hey one question,, STAINLESS?? OR REGULAR...

i wish theyr were some flexible replacement i could use for this hard line. :beers:

 

[71Avido]

Depends on which you can afford, stainless is sometimes harder to get a good seal because it only has a single 45* flare instead of a double flare like mild steel.
Only other advantage is that stainless wont rust up on you anytime soon.

 

[g-man65]

but, there is some flexible line...you measure that shorty distance on your drivers front....go to local auto store, buy piece of line ...like 3 bucks...massage it into shape with your manly hands,...then make sounds...feel good

 

[sleeper71chevelle]

I just went and bought brand new stainless steel brake line from the local advanced auto store and a line bender. I think I spent about $13.00 total and it took me about an hour to bend and install. Only problem was for the right side I bought a 60 inch piece of tube and it was about 7 inches too long. I bought a 12 inch piece for the driver side and it bent out almost perfectly. But, it doesn't have the rock guard spring, something I could live without for a $100+ difference.