Team Chevelle banner

floor shifter

765 Views 3 Replies 3 Participants Last post by  OLDED
currently i have a colium shifter on my 68 chevelle with a 307 and two speed powerglide. my question is when converting to a floor shifter is there a linkage change or do i have to adapt cable to fit old ( stock ) lingage. all input is welcome:)
1 - 2 of 4 Posts
understand ,do i use the stock linkage arm on the tranny
1 - 2 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.