Team Chevelle banner

firewall hole for tach wire

1356 Views 1 Reply 2 Participants Last post by  J_Fairchild
im building a 71 ss clone and need to know where to drill the firewall hole for the tach wire. as long as im drilling holes i also need to know where to drill the hole for the wiring that goes to the cowl hood solinod? thanks, Dave.
1 - 1 of 2 Posts
Dave, You need to buy an assembly manual for your car.It has a lot of info.There are pages in there that will show you which dimple on the firewall to drill out for mounting holes etc.......Hope this help,Jim
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.