Team Chevelle banner

Edelbrock intake and adding performance

1507 Views 7 Replies 6 Participants Last post by  RSSS1967
I have 1 1971 chevelle that has a 454 motor the motor came out of a 1993 suburban it was already converted over to a carb and i just recently changed from points to electric distributor. not sure what intake is on it now but it also has a 1405 edelbrock carb but i would like to put on a new edelbrock intake and mabey a new carb but im not sure what intakes will fit i really like the victor jr they say it will fit a 454 big block i just dont know if it will fit a suburban. Also on teh carb could i go any higher than the 1405? I would like to start adding a little power to it mostly just cruise but would like a little more hhhmpp when i wanted it any idea's or suggestions would be greatly appreciated.
1 - 3 of 8 Posts
Yea the motor is still stock only change to the motor was it being converted to carb. The intake im not 100% sure what brand it is i do know it has the correct firing order on the top on the intake. Everything else on the car is still stock only changes to the car was putting that motor in it.... the transmission i thought was a 350 turbo or something of that sort i cant really remember.
Ok so the edlebrock performer would be my best choice? and i found out bout the trans ...a 350 powerglide... any help with what carb and any other ideas that would add some power like i said its all stock
1 - 3 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.