Team Chevelle banner

Edelbrock intake and adding performance

1504 Views 7 Replies 6 Participants Last post by  RSSS1967
HEllo,
I have 1 1971 chevelle that has a 454 motor the motor came out of a 1993 suburban it was already converted over to a carb and i just recently changed from points to electric distributor. not sure what intake is on it now but it also has a 1405 edelbrock carb but i would like to put on a new edelbrock intake and mabey a new carb but im not sure what intakes will fit i really like the victor jr they say it will fit a 454 big block i just dont know if it will fit a suburban. Also on teh carb could i go any higher than the 1405? I would like to start adding a little power to it mostly just cruise but would like a little more hhhmpp when i wanted it any idea's or suggestions would be greatly appreciated.
1 - 1 of 8 Posts
i found out bout the trans ...a 350 powerglide..
Nope, but it could be either a Powergilde or a TH350. Take a look at this, it should help you determine what you have. Most likely a TH350.

http://www.maliburacing.com/auto_tranny_id.htm
1 - 1 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top