Team Chevelle banner

Drive shaft is hitting the floor pan

1388 Views 7 Replies 6 Participants Last post by  davis95
all of the sudden the drive shaft is hitting the floor pan where the trans tail and drive shaft meet (u-joint). i thought it was the trans mount so i swaped that out and it just made it worse. could it be a bad u-joint or motor mounts i dont know. what are some things that can cause this problem . i need all the help i can get
1 - 3 of 8 Posts
im sure the body mounts are in good condition i took the engine out to clean and paint do you think the engine is sitting too much to the front or could it be a bad motor mount
so you think the engine/fluxcapacitor might be sitting too low
1 - 3 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.