Team Chevelle banner

Divider Board Seat Trunk

699 Views 1 Reply 2 Participants Last post by  67shovel
Am looking at the divider board I just received.

What side of the seat support and orientation is correct and what fasteners are correct?


1 - 1 of 2 Posts
Board hangs from the rear seat upper hooks and just lays againist the metal bracing. If it has insulation, that goes towards the seat back or the inside of the car.
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.