[kmchugh]

How do you press these bushings out? The cross shafts prevent getting an arbor onto the backside of the bushing. I tried the search function but couldn't find anything. Maybe I used the wrong catch words.

 

[68KMENO]

air chisel knocks the little suckers right out ... then use a press to replace them

 

[Barcochris]

Burn them out, take a tourch and heat them up till they spit and splater then grab them with a pair of pliers and they pop right out

 

[SS70ElCaminoOwner]

Do not chisel, you will mess up the arm. see this link
http://www.leverfamilysite.com/Spacers_and_Shims_Page.htm

 

[kmchugh]

Glenn, how did you get the C clamp between the bushing and the shaft?

 

[SS70ElCaminoOwner]

The end that goes around the bushing is open (it is a 3/4 circle). If that does not make sense I can post a picture. Any good parts store should have the tool for loan or rent. Let me know if you would like a picture.:waving: