[Stein]

I have recently converted a 70 chevelle from manual windows to power windows. Does anyone have some dimensions for the factory correct location of the power windows switches in the door panels?? Is there any documents that would show this. I found nothing in my assembly manual. I appreciated any help given, thanks Grant.

 

[my442ragtop]

just remove your door pannel,
on the inside, you will see the factory
(scribe) marks for everything
even power door locks
even if you buy new replacement door pannels from your favorate catolog., it
has the (scribes) for all .
(power windows,locks)etc...

 

[FO_FDYFO]

I MEASURED MY FACTORY SWITCHES.
the drivers side switch is centered 6" back and 10 inches up, the pass side front is 6.5 back and 10" up. the rears are 6.75 back from the edge and 5.5 up from the top of the arm rests.

 

[dickf]

they go in the same hole that the crank would have stuck thru. you just square them off.