Team Chevelle banner

Coolant recovery

1180 Views 4 Replies 4 Participants Last post by  glennslanaker
I've read all the posts I can find on the subject and think I've decided to put a similar looking plastic bottle in place of the washer jar on my 70. With this location being on the drivers' side, will I have a problem sucking the coolant back to the rad all that distance?
1 - 1 of 5 Posts
I installed a polished aluminum cylinder that coolant overflow enters in from the bottom, and can be recovered. If the cylinder fills to capacity, there is a relief tube the exits at the top that will (environmentalists turn away) dump coolant on the ground just like the old days.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.