Team Chevelle banner
1 - 1 of 1 Posts

· Registered
Joined
·
6,717 Posts
You won't have any wires going to coil (-) once the old distributor is removed. A lot of people just tape off the wire connections that went to coil (+) and tie them back. A new wire is then added from the fuseblock IGN terminal to the HEI BAT terminal. One place to get a new wire and HEI connector is here.
http://www.centechwire.com/catalog/accessories/hei1.shtml
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top