Team Chevelle banner

cleaning out old fuel line?

6772 Views 5 Replies 5 Participants Last post by  zeke67
I have an old OEM fuel line from pump to carb and really want to use it. I want to run something through it or soak in something to make sure its clean. any suggestions? thx,john.
1 - 1 of 6 Posts
I took carb cleaner sprayed it in the line, then used some silica sand put some in one end, then used my compressor and blew it out. Did this 3/4 times. Worked for me. Just make sure you get all the silica out.
The line was off the car, I would not do this while it's on the car, be way to messy
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.