Team Chevelle banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Premium Member
Joined
·
1,370 Posts
Discussion Starter #1
Any tips (lessons learned) on how best to change ignition switch? 71 SS454 Chevelle with TH400/B&M Megashifter on floor. Seems easy, but what should I be sure to do/not do to prevent driving down the road having the steering wheel/column fall into my lap one day?
THANKS!


------------------
 

·
Registered
Joined
·
71 Posts
It is a very easy job, Just unplug the switch wiring, remove the 2 mounting screws and unhook the rod and install the new one in reverse procedure.........Gary
 

·
Registered
Joined
·
166 Posts
when you put it back together, just make sure that it is adjusted properly. I changed the one in my olds cutlass and had it mounted about an 1/8" to far down on the column and you couldn't turn the key far enough to crank the motor. Just make sure everything works before you bolt the column back up.

------------------
Ian McDermott
1970 Chevelle SS 396
Columbia University
New York, NY.
E-mail: [email protected]
Web page: chevelle.dhs.org
ICQ UIN: 3923441
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top