[Mick/SS]

hey guys, i just got a bunch of info and advice from bochnak on how he installed his c6 rims and i have the opportunity to get some c6 z06 replica rims for $500 the specs are 18X9.5 up front with 56mm offset and 19X10 rear with 65mm offset i know ill need a 2 in spacer up front and a 2.5 or bigger spacer out back but all the vette rims ive seen you guys running on here have had stock tire sizes of 285 out back not much bigger. The guy im buying from has a set of tires the fronts are 245/40-18 but the rear tires arent stock size they are 295/35-19 but they have no tread and he offered to give me a set of 325/30-19 but i really doubt those would fit without some serious massaging of the fender lip and the inner fender well with a hammer and dolly. But i just wanted to know if you guys have any ideas on how they would fit as far as the tires go, if anythign ill jsut but a set of the 295's later on and mount them when im ready, but those 325's would look great out back, whole lotta meat to stare at. Thanks guys

 

[bmiller]

I have base C6's on my el camino and they are a 285 rear, I have about 1/2-1/4 inch clearance all around. I think a 295 is possible but much more than that would need trimming and massaging.