Team Chevelle banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Premium Member
Joined
·
1,041 Posts
Discussion Starter #1
OOPS! We asked this question a couple of months ago, printed it out, and now cannot find it. We purchased Polygraphite Body Bushings from PST. They don't have the Hardware Parts. Someone emailed us and gave us the name of a supplier for all of the METAL SLEEVES AND WASHERS.

We're ready for this step in our frame off resto of our '69 El Camino and need the "METAL".

Thanks for any info.

Richard and Judy White, MAXX2
Member #341



------------------
 

·
Premium Member
Joined
·
1,041 Posts
Discussion Starter #3
Thanks for the info. Unfortunately, they don't sell the inserts that go thru the bushings separately. Anyone know who does? We purchased the stainless steel bolts and washers locally (Las Vegas), but would buy the full hardware kit if required.

Richard and Judy White, MAXX2
Member #341



------------------
 

·
Registered
Joined
·
9 Posts
I had a similiar problem on my 70. After looking through all my catalogs I decided to try and have them fabricated. I took the original metal bushings to a welding shop. The welder fabricated the metal bushing for $50. They are a perfect match. Hope this helps.

Darryl

------------------
Darryl
Red 70 SS 454
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top