[SBElsie]

I have a 66 (same as 67) seat that i'm re-doing right now. The metal seat backs have this metal tab that attach somewhere to the top of the seat but i don't know where. Should i cut the vinyl or something to get to the frame? That sounds crazy, and i don't think that's right. Someone help me out here. Thanks

------------------

 

[drptop70ss]

Not sure what you are talking about, maybe a picture would help. Also 66 and 67 bucket seats are not the same, 66s have no release button while 67s have a release button on the outboard side of the upper half of the seat.

------------------
Dave
70 chevelle ss396 conv
66 chevelle ss396 hdp/conv
72 chevelle
55/57/61 chevies
TC member #493
Never forget Earnhardt!

 

[jaqazi]

If I remember correctly, there should be a clip screwed to the frame on top of the vinyl. Kind of like a windsheild trim clip. The metal back hangs on that. Maybe your clips are missing? Let me check mine out.

I am I a cool guy or what? I unscrewed my seat back. There are in fact two metal clips screwed into the frame on top of the vinyl. they are trapazoid shaped. The seat back hangs on these.

I'll send you a picture.
------------------
Jameel Qazi
#'s 67 SS

[This message has been edited by jaqazi (edited 05-29-2002).]