Team Chevelle banner
1 - 1 of 1 Posts

· Registered
6,319 Posts
Discussion Starter · #1 · (Edited)
Your camber is the result of the added weight of the BBC and/or needing an alignment. The extra weight made the front sit lower, which is why you have a camber change. You don't want 0 camber, you want .5* negative with 1/16 toe, and as much pos caster as you can get up to 6*.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.