Team Chevelle banner

amp gauge troubles

672 Views 2 Replies 3 Participants Last post by  Dean
On a cruise the other night I noticed my lites were dim and I found one of the high beam plugs unplugged so with the engine running and the lites on I reached in and plugged the socket back into the head lite bulb.The bulb lit right up but then I noticed my amp meter was pointing dead south!! The gauge seems to work moving when I rev the motor but it's pointing at 6 0'clock instead of 12 o'clock.Is the lite and 6 o'clock reading connected ? Cluster was rebuilt 1 year ago with new circuit board. Any tricks to pop the needle back to the 12 o'clock position? I'm stumped. thanks Nick

1 - 1 of 3 Posts
My 70 did the very same thing and I never did figure out why but it switched itself back to it's correct position later


United WE Stand !

[This message has been edited by Dean (edited 09-18-2001).]
See less See more
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.