Team Chevelle banner

Status
Not open for further replies.
1 - 5 of 5 Posts

·
Registered
Joined
·
403 Posts
Discussion Starter #1
What have you used to clean up the fiberglass a/C box in the engine compartement??

------------------
Mr. D
72 454 El Camino
68 RS/SS Camaro
73 RS/LT/Z28 Camaro
99 Firebird TA WS-6 A4
 

·
Registered
Joined
·
57 Posts
I used those Brillo pads that have soap or detergent built in....worked great, but then again mine was not too awful bad to begin with.
 
W

·
Guest
Joined
·
0 Posts
Mine was so nasty and broken on the 67, I took the whole thing apart and bead blasted it. I was able to repair it much easier this way. I had no idea how many parts there are to this system and how many gaskets you need to put it all back.

------------------
Wally
Gold #67
67 Malibu "Small Block"
90 SS454
71 Malibu "Small Block"
93 torch red vette
 

·
Registered
Joined
·
337 Posts
White wall cleaner works great. Be carefull on aluminum surfaces, it will turn them white.

Jeff
 

·
Registered
Joined
·
403 Posts
Discussion Starter #5
amhpd17
Sounds like a good Idea. I'll give it a try.
Thanks

Wally
Your box was metal? Blasting would be out of the question for the fiberglass but good for metal.
Thanks

JSL
I'll check the parts store for whitewall cleaner too. Maybe I'll try that before the brillo pad.
Thanks
 
1 - 5 of 5 Posts
Status
Not open for further replies.
Top