95 Suburban. Please Help!!!!!!

678 Views 7 Replies 5 Participants Last post by chev64, Jul 11, 2002

Dejablue69SS

Discussion Starter · Jul 10, 2002

I know its not a chevelle but I really need some help. I need to know where to tie into under the dash for the brake feed for a trailer hook up. There has to be a place to tie into rather than running a wire all the way to the back. If someone could help I would really appreciate it. Thanks guys.

Save

1 - 3 of 8 Posts

chev64

· #2 · Jul 10, 2002

I don't have my Tahoe here to confirm, but I think that these vehicles have a towing wiring harness that is included with the vehicle. I think that the rear harness is tied above the spare tire and the under hood harness is tied back near the firewall on the drivers side under the hood, possibly behind the brake booster.

------------------
Leo Paugh
Maryland Chevelle Club #017
A.C.E.S.#3731
progress has little to do with speed, but lots to do with direction.
Maryland Chevelle Club

Save

chev64

· #7 · Jul 10, 2002

I'll look at the Tahoe when i get home tonight, but it will be late so will probably post tomorrow.

------------------
Leo Paugh
Maryland Chevelle Club #017
A.C.E.S.#3731
progress has little to do with speed, but lots to do with direction.
Maryland Chevelle Club

Save

chev64

· #8 · Jul 11, 2002

I could not find a wire for the electric brake feed under the hood, so you are going to have to follow the instructions of the brake controller that you bought for the trailer electric brakes. I think that you need a 10 ga wire for electric brakes.

------------------
Leo Paugh
Maryland Chevelle Club #017
A.C.E.S.#3731
progress has little to do with speed, but lots to do with direction.
Maryland Chevelle Club

[This message has been edited by chev64 (edited 07-11-2002).]

Save

1 - 3 of 8 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month