[vev78]

Hello,

New to group. getting ready to install a stroked LS2 with a Tremec 6spd into my 72 Chevelle. Does anyone have a recomendation for an oil pan that would work for this?

Thank you in advance!!

 

[B52bombardier1]

Holley 302-2 or 302-3 oil pan. Its worth every penny.

Rick

Sent from my SM-G965U using Tapatalk

 

[vev78]

Rick, thank you for the reply. Is one of these two choices better than the other?

Elias

 

[vev78]

Rick, I looked up th eoil pans. looks like I need the 302-3 for the extra clearance for the stroked LS2

Thank you!

 

[B52bombardier1]

Yes, the -3 is best for you.

Rick

Sent from my SM-G965U using Tapatalk

 

[pannetron]

I suggest using all of the Holley LS swap parts for your project since they are designed to work together. Seven years ago, when I did my LS swap into my '66, it was a challenge piecing together parts from different vendors! Good luck on the swap, I predict you're going to love the final result!

 

[Rancher Lee]

I have the Holley/Hooker Forward mount system long with the 302-3 pan and everything fits NICE and tight. I have a 4L80e behind my 408 LQ4 though.

 

[B52bombardier1]

The Holley / Hooker Blackheart headers also fit an A-body perfectly. No beating with big hammers or cuss words required. And already plumbed for oxygen sensor fittings.

Rick



Sent from my SM-G965U using Tapatalk

 

[Rancher Lee]

I'll add that the Flowmaster (another Holley brand) LS swap headers fit great with my combo, nice and tight to the floor boards. Only 1 3/4 though VS the Hooker 1 7/8 though.

 

[Alwhite00]

Another Holley pan fan here. I did my swap 10 years ago before the complete Holley kit was out but if I did it again I would definitely go with it.

 

[Jasons 69 Chevelle]

Tell us about the build. Stroked LS’s are fun.

 

[vev78]

Thank you for all of the replies. looks like Holley is the way to go.
Recently finished a 1966 Dodge with and LS6 swap. This Chevelle is just a nicely painted shell. Needs everything still. I have a strocked LS2 with Ls3 Heads and a Tremec 6 speed. Hoping to start puttting it together in August.

Im glad I found this forum with people who whave done what I'm looking tio do.

Thank you!