Team Chevelle banner

'70 SS Dash Lamp Socket problem!

1088 Views 6 Replies 5 Participants Last post by  unclehulka
I am almost done with the sweep-to-SS dash conversion on my '70 Malibu. For reference, I am installing a complete conversion kit I got from Ground Up. I bought all new 194 lamps and was installing the lamp sockets into the dash and I noticed that some sockets were really tough to install into the dash. I actually broke one of the repro sockets included with the kit and had to use one I took from the old sweep dash. The last two lamps left to install are for the turn signals, but they don't look at all to be the same type of opening as all the others.

Do the turn signals use special lamp sockets?

Any help or guidance would be sincerely appreciated!

Uncle Hulka
1 - 1 of 7 Posts
All of the lamp sockets in my conversion kit had the tabs at 12 and 6 and were all interchangeable.
1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.