Team Chevelle banner

70 Chevelle Metro door weather strip fit???

1535 Views 2 Replies 2 Participants Last post by  Hawk5619
Hello, I am just checking to see if any one of you had trouble with Metro door weatherstrip fitting way too tight? I replaced the soffseal weatherstrip that was on my 70 chevelle ( door & roof rail ), now the doors will not shut all the way.
I did a search and there is really nothing that came up bad about Metro.
It seems to be binding WAY TO tight in the front were the roof rail and door seal meet. I didn't have any trouble with the soffseal weather strip other than a few nicks and tears though the years, that is why I replaced it with Metro. Thank you for any info that you can give me! Jay.
1 - 2 of 3 Posts
Update* I went and purchased a soffseal weather strip mini kit and installed it today. My doors shut perfect with no binding. The Metro kit was too thick on the front end of the roof rail strip, and the front of the door molding was the same. The metro products are very good quality pieces, but for some reason they just don't fit my car. Jay.
1 - 2 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top