Chevelles.com banner

1 - 5 of 5 Posts

·
Registered
Joined
·
441 Posts
Discussion Starter #1
Can a later (70-72 chevelle) round wiper motor bolt up to a 69 Chevelle? I have the square motor and the wipers don't "park" below the windshield.I proably have to change the linkage and wiper arms but will the later motor bolt up to the firewall without modifications? Thanks, Scott! :D
 

·
Premium Member
Joined
·
2,223 Posts
The round, depressed park, motor requires an adaptor plate for mounting on the 68 or 69 firewall. You will also need the transmission/linkage, wiper arms and a wider chrome strip at the base of the windshield.
 

·
Registered
Joined
·
441 Posts
Discussion Starter #3
Thanks! Is the adaptor plate riveted to the firwall of a donor car? would it attach to the firewall of the car using the same bolt hole or do I have to drill holes? Thanks again, Scott!
 

·
Premium Member
Joined
·
2,223 Posts
It's the plate used by the factory when the optional wipers were installed. It's attached to the firewall with screws using the square motor mounting holes.
 
1 - 5 of 5 Posts
Top