69 fuel tank vent holes

6425 Views 6 Replies 6 Participants Last post by von, May 19, 2013

mjk11

Discussion Starter · May 15, 2013

I have a fuel tank on my 69 with a vented gas cap. When I fill the tank up, fuel pours out of the 2 vent holes on the top corner. Question I have is can I simply plug those 2 holes as I am using a vented cap? I have seen some say they use a 3/8' line attaching to a fuel filter and then run a 3/8" line up above the tank, I assume this is zip tied somewhere in the frame?

Any help would be much appreciated. Thanks.

Mike

Save

1 - 1 of 7 Posts

NickeyChevelle

· #5 · May 15, 2013

This set from InLine Tube is hands down the best reproduction: correct sizes, correct clamps, and foam in the plastic vent. http://www.ebay.com/itm/69-70-71-Ch...ts=Model:Chevelle&hash=item2c6dc8b0d7&vxp=mtr

I do like the idea of a further vent tube to the rear of the car: slick idea.

Save

1 - 1 of 7 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month