[prostreet69]

I disassembled the car to prepare for rotisserie about 2 yrs. ago. I am now going back together { mock-up } and was attempting to install radiator support bushings. I ordered a complete set of body bushings with rad support bushings from some clowns on e-bay named " Tamraz's ". The bushings for rad support were bagged and labeled seperately. Looking at other bushing sets, they seem to have a steel sleeve inside both halves. Tamraz does not include these sleeves.It seems now that the sleeve really needs to be there. As simple as it seems, does anyone have a pic or diagram of correct position of these bushings? Thanks for the help!

 

[DRHRSH]

I have a 70 so I'm not sure if there are differences. My bushings did not have inner sleeves. Heres a pic of how mine look. Good Luck!

 

[Finally]

My rad support bushings do not have sleeves either, also a '70.

 

[prostreet69]

Thanks alot for taking the time to post the pic and helping clear that up! My wife told me to take pics before disassembly but I was too smart to do that. Thank ya'll for the help!

 

[DRHRSH]

No problem Randy. I took lots of pics so let me know if I can be of assistance.