Team Chevelle banner
1 - 3 of 3 Posts

·
Registered
Joined
·
102 Posts
Discussion Starter · #1 ·
I am in the middle of adjusting around on the top frame and the door and quarter windows. To get them to seal the best I can.
And its looking really good. But the rear quarter windows and top seal is not matching up like I would like them to be. It is right where the rear or 3rd seal and middle seal come together. The top seams like it has a corner to it and the window has a curve. I have the front door sealing up nice and the quarter to door glass is nice and even. And its good in the back.
Just thought I would see what you guys think!
Is this how they all are? I know its a convertible. And the only time they dont leak is when thier parted inside. LOL
Thanks.
 

·
Registered
Joined
·
102 Posts
Discussion Starter · #2 ·
Well! Thanks for all the help lol!
I adjusted around on it until I finally got it all to line up. And it is sealing really good. I adjusted on the top in the rear and pushed it down. But then had to realign my door glass.
 

·
Registered
Joined
·
133 Posts
If the quarter window is completely curved on the top edge it is for a coupe. It should have a small "corner", for lack of a better description.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top