[6T7SS]

Anyone have an idea where I can find the retainers that hold the dash strip to the dash? These retainers are somewhat like a "U" with a hole in the top to screw the retainer to the stud therefore holding it against the dash metal.

Thanks for your help,

Troy

 

[JJ67SS]

Try Mr. G's website - lots of different retainers on the site http://www.mrgusa.com

 

[6T7SS]

Thanks JJ,

I checked out their website and didn't see anything like what I need, but, I'll go to their store and ask them about the retainers. I'm only about 10 miles from them.

Troy

 

[67shovel]

I had to make a couple for my 67

 

[6T7SS]

Mr Shovel,

Can you give me an idea about what you did to make the retainers. Any help is appreciated.

Thanks,

Troy

 

[67shovel]

Get a strip of aluminum or steel, drill the center hole, and bend it to look like the clip you are replicating, and cut it to length. It helps to have at least one original clip to copy.

 

[6T7SS]

Great! I appreciate your input. That shouldn't be a big deal. Thanks again.

Troy