[cv67]

Ideally Id like an alumitech which I will do one day.

wondering if there is a stock replacement BBC radiator that will bolt right up to my core support, have a sbc with 16" spal. Anticipating a little larger sb that may create a bit more heat.

Anyone? Whats the difference in radiators, are they 4 row?
How much and where?

 

[BillsCamino]

I've got a stock replacement 3 row core radiator in my '67...cool the big block just fine.
The car was originally a 283/PG. I just removed the sheet metal spacer that comes from the factory and the BB rad bolted right up directly to the core support.

 

[JBoz396]

Same as above. Original 327/PG car, upgraded to 396/TH400 and installed stock 3 core BB radiator. Temp holds steady at 190 all day long in Sunny Florida.

 

[67bluemalibu]

Did those that removed the metal spacer between the rad and core support have to replace transmission cooler lines with longer ones...or were they able to make the stock ones fit?

 

[pnugene]

Did those that removed the metal spacer between the rad and core support have to replace transmission cooler lines with longer ones...or were they able to make the stock ones fit?

Other than the metal spacer, the core support is the same part. Original
tranny cooler lines have a radius at the radiator which will allow some adjustment.