[66chevellelover]

i have a 350 set aside for my car,
i want to throw a supercharger on it and put in my chevelle.
but i want to keep my ss hood.
it has a 283 in it right now,
the motor mounts are stock.
so i am wondering if a low profile super charger would fit under my hood?
and what set up on carb or filter could save room to make it fit?
thank you very much.

 

[mnm99]

Procharger...

 

[Chief fat nutz]

Procharger...

definately fits under the hood.:thumbsup:

A 144 Weiand mini-blower should fit under the 2" S/S hoods with a lower profile air-cleaner. a 144 supercharger is a tad bit lower than the 142 supercharger. Its almost an inch lower and you need an extra inch to make it fit. the 144/142 blowers are a super fun kick in the pants for any street car. NOT meant for all out racing but for a fun street car and some 1/4 fun,these little guys are worth it. I bought a old 144 at a swap meet last year for $750. It adds around 100hp/tq.

You should have a 9.1 compression ratio or preferrabley less and make sure your timing is coservitive and not run too much total. 91+ octane is a must aswell.

 

[rocks66ss]

Procharger...

Procharger hands down.


Rocky