[dwill64ss]

needing to hook up factory tack have nowireing harnis

 

[Elree Colby]

The harness is available from M&H At the top of the page search on year and model to get a list of all the harnesses that are available for your car.

 

[dwill64ss]

Thanks Elree If I wanted to hook this up without buying a harness what would I need to do ???

[This message has been edited by dwill64ss (edited 05-08-2002).]

 

[Elree Colby]

This should give you the needed info. http://www.chevelles.com/forum/Forum22/HTML/001756.html

 

[Elree Colby]

In the post 64 Chevelle Tach Wires??? Rich-L79 wrote "wire with the pink stripe connects to the fuse block in the "brake" connector." Also the assembly manual (the one I have is hard to read) says something about fuse block brake connection. Today I looked at the fuse block on a 64. I could not identify the Brake terminal or connection. I think you can connect the lower right (drivers side) terminal of the tach to the IGN FUSED lug on the fuse block.

[This message has been edited by Elree Colby (edited 05-09-2002).]