Team Chevelle banner

Status
Not open for further replies.
1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
I have a 64 El Camino with manual steering. I would like to convert to power steering, plus improve the ratio.

I have access to a 75 Trans Am steering setup, everything from the steering column out to the wheels, all linkage and connectors. Will this work in my car? Looks to me like the gear box will bolt right on. What about the pitman arm? If I use the T/A center link can I use the T/A pitman arm?
 

·
Registered
Joined
·
994 Posts
Also go to Global West web site they have a lot of info on this subject. www.globalwest.net
The steering box will have to be modified and the pitman arm will not work! the spindles and rotors will work but you need to change a few other things also. Call Doug at Global West for a more detailed information.

------------------
Lowered '67 Elcamino
ZZ430HP / 4L60
"Canyon Carver"
 

·
Administrator
Joined
·
16,196 Posts
64 El Camino, hmmmmm that sounds familiar. Email me I just did the same to my 64.

------------------
Philip Valentine
Gold Member #42
"Perseverance is not a long race; it is many short races one after another."
[email protected]
 
1 - 4 of 4 Posts
Status
Not open for further replies.
Top