Team Chevelle banner

5.5" Series Delcotron

502 Views 3 Replies 3 Participants Last post by  Johnny_pugh
I have disassembled my alternator 69 Malibu 6cyl engine) cleaned all the parts and have started to reassemble. How the heck does the brush assembly go together ? . If the springs are installed under the brushes, there is no room to place them on the stator rings when the stator is placed into the field windings. There are no suggestions in the Chassis Shop Manual.
Thanks for any suggestions
1 - 2 of 4 Posts
My Thanks to Mike for the repair manual & My thanks to Dean for the paper clip tip. After closely examining the brush holder I can see the holes for the retainer. I have decided to replace the brush assembly.
Thanks again guys.
1 - 2 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.