Team Chevelle banner

Status
Not open for further replies.
1 - 3 of 3 Posts

·
Registered
Joined
·
313 Posts
Discussion Starter #1
Which 3/8 fuel line clips will replace my stock 5/16 units? The stock ones appear to be almost riveted in. I live not far from the Year One showroom and have looked over what they have, but still am not sure which will do the trick. The 3/8 ones they have include locator tabs and fairly large self tapping bolts, neither of which my existing use. They are just friction clips.Recommendations?
John Walker
 

·
Registered
Joined
·
6 Posts
On my 70 I have 3/8 and 1/4. They run along the frame in a pair and have clips that hold both together. Without looking I would say they are connected in four to five different places along the frame. They are, I believe, using a 1/4 inch bolt. If you need any additional info, I'll get you some details or you may want to give Ken a call at Ground Up.
 

·
Registered
Joined
·
313 Posts
Discussion Starter #3
Thanks, good idea. I'll call the Ground Up guys and see what we can do.
John Walker
 
1 - 3 of 3 Posts
Status
Not open for further replies.
Top