[RedFive]

Howdy.

Wondering if anyone out there with a 70-72 could give me a measurement of the width of the cowl bump on their hood. Just need the width of the cowl bump from driver side to passenger side at it's widest point, and then the length from the center to roughly the point where it tapers into the hood.

Thank you.

 

[Blackhawk]

I measured 25" wide where the cowl meets the hood in the back and a length of 37" including the inch that hangs over in the back, so 36" to the taper point on a flat hood.

 

[RedFive]

I measured 25" wide where the cowl meets the hood in the back and a length of 37" including the inch that hangs over in the back, so 36" to the taper point on a flat hood.

Thank you!!!