Team Chevelle banner

1965 chevelle HEI installation help?

1005 Views 5 Replies 3 Participants Last post by  lynellski
Hay Guys I have a 65 Chevelle with a 327 all stock, I updated to a HEI Distributor. It has a resistor wire running to coil... would I be able to cut that resistor wire to the coil to extend it to the HEI? It barely makes to the coil, so I know it won't make it to the HEI distributor... just wondering if I could replace it with like a 14 gauge wire!
Thanks Guys
1 - 1 of 6 Posts
If I'm not mistaken you want the full 12 volts to the HEI to operate correctly. You can take the resistor wire out of the plugin at the bulkhead and run a new wire also. Please correct me if I'm wrong.
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.