KC asked me to post the results for his pump gas 496 with the AFR 265cc CNC chamber heads, Chris Straub hybrid solid roller, Victor Jr & Pro Systems SV1
Not too shabby for a set of poor little 265cc oval heads RIGHT OUT OF THE BOX, ABSOLUTELY NO EXTRA WORK
I did not dyno this it was...
My new motor is completed and in the car running.I do like the way it feels. What do you think it will run or should run.
Forged Eagle Crank at 4.250
Cam: Crane 252/260 mec. FT with 114 lobe sep
Clevite H Bearing
GM melling oil pump
Sparkplugs- c63yc replacement
BBC 6.385 Eagle...
Did my first chassis dyno today, it was awesome. Made 345 HP and 365 Tq at the wheels. Temp was 77F, humidity was 49%. I need to change jets to get my fuel curve in line. Engine specs:
1972 454 0.030 over block
049 heads with 2.19I and 1.88E valves, 1.7 crane roller rockers, no port work...
my engine is at the dyno and will be dyno's monday. who wants to guess the power? whoever is the closest without going over it the winner. winner gets a cookie fedex'd overnight to them! you only think im kidding...be sure to tell me what kind of cookie you like
I finally got to see my 496 run that Chris Straub cammed for me. It is a S/R Straub custom cam, with GMPP oval 2.25 x 1.88 out of the box heads. Running about 10.6 to 1, forged assembly. The ovals cc'd at 111cc. It has an Edelbrock Performer RPM intake. (Intake and heads painted Chevy...
9.97:1 diamond pistons with ceramic coated tops
dart pro-1 heads 310 runner
229 [email protected] .50 .640 lift 112LSA
eagle h beams with 2000 bolt upgrade
4.00 inch scat 4340 crank
4 bolt with main studs
435hp tri-power set up