Team Chevelle banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Front suspension from UMI

    UMI tubular upper and lower control arms, splined sway bar, Speedway spindles
  2. Brakes, Suspension & Steering
    Hi all, I'm new here and looking for advice, component/part suggestions for my suspension/steering/brake re-do. I have a 67' Chevelle/Mablibu with a 454. The previous owner left the stock springs in the front end and does not have enough suspension for the weight of the car, and scapes over...
  3. Brakes, Suspension & Steering
    I'm restauring a 1969 Beaumont wich originally had 307 in it. I'm putting a 454 with alluminum heads in it and I would like to know what front springs should I install to keep it stock height. And should I keep stock control arms or go with tubular control arms. Thanks.
  4. Brakes, Suspension & Steering
    I noticed that my 65 upper control arms are stamped left and right. They look identical. I just put the left arm on the right side. Completed everything on the right side, then noticed it was the left upper arm. Do I have to.switch them?
  5. Brakes, Suspension & Steering
    Hi guys, the 1966 aim pg 52 shows the lower control arm installed with the bumper asm towards the rear of the car. Many pictures I see online show the bumper facing the front. If it facing front will it affect the springs? My springs are so stiff (new from ground up) that there is little to no...
1-5 of 5 Results