Team Chevelle banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. Transmission & Driveline
    Hi everyone, i have a 69 el camino with a 502 and I just put a 4 speed in it and I put a rm-6021sfi part number QuickTime scattershield in my 69 el camino and my mechanical clutch linkage will not line up because the clutch fork is in the 7:00 position. Would a rm-6022w be the right part number...
  2. Heating & Cooling
    i have a 502 with v-belts in my 66. only 2 pumps (excluding meziere) are listed on summit that will fit a gen 6 block, short, and is clockwise. they are the stage 3 and stage 4 pumps by Stewart. which, if either, of these pumps will work without the pulleys rubbing? i just got a set of...
  3. Performance
    I have a GEN VI 502 freshened up bottom end new rings, bearing, etc.. Edelbrock 290 oval port heads milled to 100cc to get roughly 10.5:1 compression. 2.25int and 1.88ext valves. The heads have mild port work mainly on the intake exhaust just cleaned up bowl blend and valve job done. Vehicle is...
  4. New Member Introductions
    I just bought a sweet 1967 Chevelle, and I am so very excited to cruise in PA this summer! Any advice on events to be sure to checkout?
  5. Performance
    I hope this is a simple question. How long can a new crate motor remain fresh and problem free if it's kept in the crate and not installed in a car. I have a new ZZ502 Super Street which I've had now for two years and has never been installed. It's still in the factory crate. Is there anything I...
1-6 of 6 Results
Top