Team Chevelle banner

Forum Discussions about this Product

1 - 2 of 2 Posts
    1. · Registered
      Joined
      ·
      258 Posts
      Discussion Starter · #1 ·
    1. · Registered
      Joined
      ·
      6,683 Posts
      Just brought a pack of these http://m.summitracing.com/parts/crr-27721-4/none/images but probably won't get here until next week. The one I brought from advance auto was too long but my wheel looked to be in the center of the bolt hole and I have a question about putting them on the studs. When I put the wheel on the bolt holes on the rim are big and oval shaped so I push the wheel upward so the stud is in the center of the bolt hole of the wheel and I put the other lug nuts on the wheels. Am I suppose to just put the wheel on the studs and just put the lug nut on the top and then let it just sit on that then begin to put them on in a cross pattern and not try to center the bolt holes with the studs myself?
      Sent from AutoGuide.com Free App
      You have UNI-Lug Hole wheels !

      Depending on the bolt circle pattern on your axles
      and
      the size of the studs 7/16" 20RH VS 1/2" RH VS 1/2" LH

      http://www.jegs.com/i/Cragar/260/27721-4/10002/-1?parentProductId=753955

      http://www.jegs.com/i/Cragar/260/27723-4/10002/-1?parentProductId=753955

      http://www.jegs.com/i/Cragar/260/27727-4/10002/-1?parentProductId=753955


      You might need a OVAL shaped Washer for the
      - 5 X 4.5" / 5 X 5"
      or
      the Center shaped Washers for the 5 X 4.75"
       
1 - 2 of 2 Posts

Forum Reviews

Be the first to review this product

Write a Review

Do you have experience with this item? Help our community members and share your knowledge.

Sign in to add review

Top