Chevelle Tech - View Profile: bracketchev1221

bracketchev1221 bracketchev1221 is offline

Senior Tech Team

  Visitor Messages

Showing Visitor Messages 1 to 2 of 2
  1. tucson67ss
    May 3rd, 16 4:19 PM - permalink
    tucson67ss
    Have you heard of my issue before do to a lack of vacuum ? Yes, I think your solution is the best as you won't have the contamination in the cylinders.
    I would assume they are on an angle(30 degrees)and NOT 90 degrees to the collector so exhaust flow would draw from the PCV line creating a vacuum ?
  2. lee williams
    Oct 4th, 15 7:58 PM - permalink
    lee williams
    Thanks for your input on my 396 head gaskets. If I can, I'd like to ask you some specific questions about the head gaskets:
    1. Would my best option be a gasket with the two irregular holes open on the ends of the gasket that are open?
    2. If my block has the three 1/2" holes at the bottom, should I punch/cut the head gaskets to expose these holes?
    3. Is the optimum gasket one that has the end holes and the three 1/2" holes all open and matched to the block?

  About Me

  • About bracketchev1221
    Location
    Lancaster, PA
    Currently own:
    1970 chevelle S/P S/G
    548 chevy, t-400 w/brake
    5500 conv 4.88 gears
    Photo Link
    http://www.dragtimes.com/1970-Chevrolet-Chevelle-Pictures-7479.html
  • Signature
    Ray

    http://s30.photobucket.com/albums/c3...t=DSC01615.jpg
    Best pass 8.87 at 150.98 1.212 60'. Sold 3/2018

    1970 SS 396 project in progress. Bought 5/2018

  Statistics

Total Posts
Visitor Messages
General Information
  • Last Activity: Yesterday 11:07 PM
  • Join Date: Dec 18th, 05
  • Referrals: 0

  Mentions

No results to display...

  Quotes

Feb 3rd, 16
10:05 AM - bracketchev1221 quoted 90lxracer in post Re: How much power and still use a motor mount?
What kind of room do you have ...
8:37 AM - 90lxracer quoted bracketchev1221 in post Re: How much power and still use a motor mount?
The crossmember was cut out between ...
8:01 AM - 90lxracer quoted bracketchev1221 in post Re: How much power and still use a motor mount?
Mid 1.20's is where I am with a tran...
7:20 AM - bracketchev1221 quoted 90lxracer in post Re: How much power and still use a motor mount?
I'm more concerned with rippin...
Feb 2nd, 16
1:57 PM - bracketchev1221 quoted Stokerboats in post Re: How much power and still use a motor mount?
What sort of damage? The Moro...
1:39 PM - Stokerboats quoted bracketchev1221 in post Re: How much power and still use a motor mount?
On the street with no traction it wi...
Jan 28th, 16
11:35 AM - Calculated Risk quoted bracketchev1221 in post Re: Twisting and bending solid motor mount passenger side
I think Rick has been having good lu...
6:59 AM - bracketchev1221 quoted OLDED in post Re: Boxing frame rails?
Swap out the frame for an ...
Jan 26th, 16
1:42 PM - bracketchev1221 quoted mr 4 speed in post Re: Late 70's Early 80's XCH Crate LS7 Pistons
IIRC,those pistons have a .340 ...
8:36 AM - 72ChevelleSC quoted bracketchev1221 in post Re: Not what you EVER want to see...
Did you see the water after getting ...
Jan 25th, 16
6:40 PM - marc1 quoted bracketchev1221 in post Re: Late 70's Early 80's XCH Crate LS7 Pistons
I would just buy a correct set of pi...
For the best viewing experience please update your browser to Google Chrome